5pcs Sticky Adhesive Pad for Dash Cam Mount, Double-Sided Strong Mounting Tape Circle Sticker Replacement for Car Windshield Dashcam Windscreen Window Glass Suction Cup Camera Holder (63mm/ 2.48″)

Product Description

[Package Includes ]

1) 5pcs Genuine iQIHAN round transparent 2-sided ultra thin adhesive pads for mounting windscreen dashcam holder (diameter:63 mm /2.48 inches).

2) 6pcs cleaning bags for cleaning surfaces before mounting！

[Designed for Dash Cam Suction Cup Mounting Base]

5pcs iQIHAN Round Stickers for dashcam suction cup mounting base can fix your car dash camera recorder suction cup mount more firmly on the windscreen.

[Very High Bond]

The double side adhesive is made of high quality acrylic material with high bond stickiness, high temperature resistance and strong toughness. Outperforming other regular dash cam sticky pads, perfect for automotive environment. It can makes the windscreen suction cup dash cam bracket firmly fixed even in hot weather. These advantages allow you to drive your car, truck, RV, SUV, roadster, van or other vehicles without worrying about the dash cam falling off, ensuring safety.

[Transparent Adhesive – Without Affecting the Appearance]

Transparency is a highlight of this clear round heavy duty two-sided non-slip adhesive pads. You can stick the acrylic self-adhesive circle clear adhesive on the suction cups, without affecting the appearance of the suction cups. This is a very suitable choice for people with high requirements.

[Tear Without Residue]

-The durable adhesive adherence mount kit has super strong adhesion and powerful toughness.When you want to change the position of the windscreen dashcam holder, the adhesive glue padded will not leave marks.

-NOTE: Please make sure the windscreen surface and suction cup holder base are completely clean before applying new adhesive.

[Wide Application – Cuttable]

-Self-adhesive slim mounting gel adhesives (Diameter is 63mm /2.48″) for windscreen suction cup dashcam mount!

-You can cut these multifunctional universal adhesives into smaller sizes or other shapes for windscreen dashcam mount, dashboard mounting disk, GPS navigation mount, sat nav, car ipad mount, tablet holder, camera vehicle mount, automotive decorations, wireless charger bases, electronic products, toys, radar detector mounts,dash cam mirror, backup camera screen, action cameras, automotive cradle, alarm sensors, magnetic phone bracket base, monitors, baby car camera, front and back camera, blackbox camera, night vision driving recorder, phone usb cable clips, audio video recording camera, driving recorder, safety camera, sound recording, rear camera, active camera, reverse camera, security cameraand, dvr, film camera, and so on.

-This high-strength double-stick waterproof adhesive tape you can also use for office, hard leather, glass, plast, kitchen wall, kitchen, aluminum toilet paper holders, toothbrush holder, shower towel holders, desk, etc.

[Easy to Mount]

1) [IMPORTANT] Remove the old adhesive and clean both mounting surfaces, making sure the surfaces are clean and dry.

2) Peel off the yellow protective film from the adhesive and attach it to the suction cup holder base. Press repeatedly to ensure full contact between the adhesive and the suction cup base.

3) Peel off the red protective film from the adhesive and stick the suction cup to the car dashboard plate. Press repeatedly until the adhesive is in full reattach contact with the surface.

IMPORTANT: It is normal for the red protective film to be difficult to remove! If you encounter this situation, please use dental floss or fingernails or other small tools to press the gel sticky part, and then try to separate the red film.

4) Wait 24 hours to allow the adhesive to develop sufficient tack before using the mount.

Note: The bonding stickiness of the adhesive increases with time.

[Notes]

1. Please do not reuse sticking adhesive tape, adhesive can only be used once.

2. Please do not stuck the adhesive tapes on soft leather, oily, painted walls, rough, textured, bumpy, curved, uneven surfaces, and silicone pads.

3. Choose to stick a relatively flat, smooth, plastic, and tiles surface.

4. The longer you wait after installation, the stronger the adhesive will stick.

5. Please wait at least 24 hours after sticking to ensure that the adhesive reaches its maximum stickiness.

6. Please do not touch the sticky part of the adhesive with your hands to avoid the adhesive losing stickiness.

7. Please do not put the stickers in direct sunlight to avoid the adhesive losing stickiness.

【Designed for Dash Cam Suction Cup Mounting Base】5pcs iQIHAN round dual sided stickers for dashcam suction cup mounting base can fix your car dash cam recorder suction cup mount more firmly on the windscreen. The double sided adhesive is made of high quality acrylic material with high bond stickiness, high temperature resistance, strong stability and strong toughness. It can makes the windscreen suction cup dash cam bracket firmly fixed even in hot weather.
【Transparent & Super Strong Adhesion & Tear Without Trace】Transparency is a highlight of this clear circular heavy duty two-sided non-slip adhesive pads. It is low-profile, you can stick the self adhesive anti-gravity adhesive on the suction cups, without affecting the appearance of the suction cups. This functional adhesive has super strong adhesion and powerful toughness. When you need to change the position of the windscreen dashcam holder, it won’t leave marks.
【Wide Application – Cuttable】Self-adhesive mounting gel adhesives for windscreen suction cup dashcam mount! You can cut these universal flexible double-face adhesives into smaller sizes or other shapes for different sizes of windscreen vehicle recorder holder, dashboard mounting disc, GPS navigation mount, sat nav, dashboard cellphone holder, car tablet mount, outdoor camera car mount, vehicle decorations, wireless charger bases, electronic products, toys, window, radar detector mounts, reversing cameras, action cameras, alarm sensors, monitors, ect.
【Easy to Mount】Provided with rounded rectangular raised tabs, the protective film can be easily peeled off. When using, firstly clean the surface to make sure the surface is clean and dry. Secondly, peel off the yellow protective film from the adhesive and attach it to the suction cup holder base, and press repeatedly to ensure full contact between the adhesive and the suction cup base. Then, peel off the red protective film from the adhesive and stick the suction cup to the car dashboard and press repeatedly. Finally, wait 24 hours to use.
【Product Includes】1) 5pcs round transparent heavy duty removable rubber adhesive gel pads for mounting windscreen suction dash cam holder (Diameter: 63 mm / 2.48 inches). 2) 6 packs cleaning bags for cleaning the mounting surfaces before use. 3) If you encounter any problems before, during or after use, please feel free to contact us and we will solve the problem for you!